SDH Terminal Multiplexer, E1,VLAN Ethernet,V.35
This equipment provides multi-service access, E1, FE, V.35
- Product description
- Functions
- Technical parameters
- Application
TK-SDH155-TM01 is SDH terminal multiplexer,it support multi service access, E1, Fast Ethernet, V.35 access,Ethernet can be support VLAN. V.35 data can be framed and unframed.
-
TM, Multi-Service, including E1, FE, V.35
-
Flexible options for the STM-1 fiber optic interface, including single fiber duplex, as
-
well as different power and wavelength choices.
-
Standard based GFP/VC-12 VCAT, support VLAN, EoS
-
Built-in BERT and loop-back capabilities
-
Framed and unframed V.35
-
Remote AC power failure alarm
-
Standard 19 inch 1RU box, compact, lightweight, low power consumption
-
Dual mode power supply, -48V DC or 100-240V AC field selectable
-
Support online upgrade of embedded program and FPGA program
STM-1 Fiber Port
Bit rate:155520kbit/s ±4.6ppm
Line code:Scrambled NRZ
Wavelength: 1310nm 1550nm
Connector:SC FC
Fiber Spec. S-1.1, L-1.1, L-1.2
Single fiber bi-directional interface can be optionally supported
E1 Port
Bit rate:2.048 Mbps ±50 ppm
Line code:HDB3
Impedance:75ohm 120ohm
Frame Structure:Non-framed
Number of ports:4~8
V.35 Port
Bit rate:Nx64kbps ±50 ppm,N<=31
Frame Structure:G.704 or unframed
Interface mode:DCE or DTE
Number of ports:0~1
Ethernet Port
Interface mode:10Base-T/100Base-T, Half/Full duplex, auto-netiation,HP auto-MDIX
Trunk port:
NxVC-12 N<=63,GFP
Number of ports:0~4
Management Port:Ethernet:
RJ45, 100Base-T, MDI port
Others:DCC, E1
Mechanical/Electrical
Dimension:44mm x 138mm x 440mm (H/D/W)
Net weight:2kg
Power (AC):100 -240 V, 50/60Hz
Power (DC):-48 V (-58V to -38V)
Consumption:<=10W
Working temp: 0 -45’C
Humidity:0-90%RH (non-condensing)
Ethernet socket:RJ-45
V.35 socket:DB25
E1 socket:RJ48
Timing:Inner clock, STM-1 line clock, E1 interface clock, external clock.
Address: NO.220, Qiutao Road, HangzhouCity,Zhejiang Province, China 
Tel: 0086-571-28184719
Fax: 0086-571-28184719
